Written by admin on April 13, 2017 in

Part Nos: 516 / 517 / 518
Male versions of Tappex HiMould 116 / 117 / 118

Material: Brass – to BS EN 12164 CW 614N
REACH/RoHS compliant as per the candidate list of substances of very high concern.

Finish: Self-Colour. Special finishes to customer requirements, at extra cost.

Description: The Male HiMould is designed to be moulded-in. The external form has a diamond knurl with two undercuts. The part number is defined by the female body size a number 5 replacing the first 1. Special ends to the thread such as dog point or chamfer may also be specified.

Application: This insert provides excellent pullout performance and resistance to rotation.

Installation: The Tappex HiMould style male insert is designed to be installed into a recess or pocket in the mould tool. Where access to the rear of the insert is not feasible or acceptable to the design a sealing feature can be incorporated in the plain portion to prevent the molten plastic reaching the threads.

Male Inserts - HiMould