Written by admin on April 13, 2017 in

Grooved Pin S80
Third length parallel parallel grooves
Part No. 108

Typical Applications

  • The use of a parallel groove improves pin retention.
  • Should be used to replace 058 pins in applications where high vibration or shock loading may occur.
  • Use where shorter groove lengths are required.




(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 6mm to 180mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 6-12mm as standard. Specials will also be considered to suit your individual needs.