Written by admin on April 13, 2017 in

Grooved Pin S50
Full length parallel grooves double spigot
Part No. 106

Typical Applications

  • A plain spigot at each end of the pin allows location in the component before assembly but removes problem of orientation of the fastener.
  • Suitable for automatic assembly as for type 105.


(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to to 25mm. Standard Lengths (L) available from 4mm to 110mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.