Grooved Pin S10
Third length tapering grooves two annular rings
Part No. 102

Typical Applications

• Central tapering grooves for ease of installation.
• Two annular rings for reciprocating springs or as a fixed axle in conjunction with retaining rings or circlips.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 2mm to to 25mm. Standard Lengths (L) available from 12mm to 180mm*

*depending on pin Ø required, for example, Ø2mm can only have a length of 12-30mm as standard. Specials will also be considered to suit your individual needs.