061
Grooved Pin S7
Half length reverse tapering grooves annular ring
Part No. 061
Typical Applications
- Reverse taper grooves are designed for installation into blind holes.
- Annular ring acts as circlip grooves, etc., as for 062.
(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 2mm to to 25mm. Standard Lengths (L) available from 6mm to 180mm*
*depending on pin Ø required, for example, Ø2mm can only have a length of 6-30mm as standard. Specials will also be considered to suit your individual needs.