104
Grooved Pin S24
Half length parallel grooves
Part No. 104
Typical Applications
- A parallel groove over half the length of the pin significantly increases resistance to withdrawal in arduous applications (e.g. shock and vibration).
- Plain spigot on grooved end allows location in hole before assembly.
- Hole preparation recommendations should be followed closely.
(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 160mm*
*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-12mm as standard. Specials will also be considered to suit your individual needs.