Grooved Pin S5
Full length parallel grooves DIN1470
Part No. 100

Typical Applications

• Plain spigot on one end of pin allows the fastener to be easily located in the drilled hole before assembly
• Maximum retention from parallel grooves
• Plain spigot length can be increased for special applications
• Application as for part no. 059

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 110mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.