Headed Grooved Pin N5
Countersunk Head Drive Pin DIN1477
Part No. 064

Typical Applications

• Similar applications to pin 063 but with a countersunk head.
• For applications where a flush fit is necessary.
• Increased groove length will give increased retention where the application allows.

(Note : Letters denote critical dimensions of Headed Grooved Pin, please contact Tappex for details). Standard Diameters available from 1.4mm to 20mm. Standard Lengths (L) available from 3mm to 40mm*

*depending on pin Ø required, for example, Ø1.4mm can only have a length of 3-7mm as standard. Specials will also be considered to suit your individual needs