Grooved Pin S6
Half length tapering grooves annular ring
Part No. 062

Typical Applications

• Combination of tapered grooves and annular ring provides a dual purpose pin fastener.
• For use in drilled through holes.
• For applications where reciprocating springs, circlips or retainers need to be used.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 2mm to to 25mm. Standard Lengths (L) available from 6mm to 180mm*

*depending on pin Ø required, for example, Ø2mm can only have a length of 6-30mm as standard. Specials will also be considered to suit your individual needs.