059
Grooved Pin S3
Full length parallel grooves DIN1473
Part No. 059
Typical Applications
- Maximum retention over whole length produced by full length parallel grooves
- Suitable for applications involving longitudinal stress and vibration
- Replaces type 055 where improved performance is required.
(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 120mm*
*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.