Grooved Pin S8
Third length centre tapering grooves DIN1475
Part No. 058

Typical Applications

• Tapering groove design gives easy installation either way.
• Central location allows the pin to be used as a cross handle, hinge pin or fulcrum bolt.
• A plain portion at each end gives a free fit for mating components.
• Length of grooved section can be increased or decreased to suit applications.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 1.5mm to 25mm. Standard Lengths (L) available from 8mm to 180mm*

*depending on pin Ø required, for example, Ø1.5mm can only have a length of 8-20mm as standard. Specials will also be considered to suit your individual needs.