057

Written by admin on April 13, 2017 in

Grooved Pin S4
Half length reverse tapering grooves DIN1474
Part No. 057

Typical Applications

  • Reverse taper groove eases installation into blind drilled holes.
  • Half length plain portion can be used as a drive element stop pin or bearing.
  • Plain portion can also be used as a handle replacing an expensive threaded component.

 

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 1.5mm to 25mm. Standard Lengths (L) available from 4mm to 180mm*

*depending on pin Ø required, for example, Ø1.5mm can only have a length of 4-20mm as standard. Specials will also be considered to suit your individual needs.