056

Written on April 13, 2017 in

Grooved Pin S2
Half length tapering grooves DIN1472
Part No. 056

Typical Applications

  • Plain portion over half length serves as free moving hinge pin for application as a dowel pin or linkage bolt; axle or bearing pin.
  • Half tapered grooves ease assembly in through drilled holes.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 180mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-12mm as standard. Specials will also be considered to suit your individual needs.