Grooved Pin S1
Full length tapering grooves DIN1471
Part No. 055

Typical Applications

• Original replacement for a conventional taper pin eliminating reaming of drilled holes thereby reducing machining time.
• Tapered grooves allow easy progressive installation.
• Used as a locking pin, fixing pin or connecting pin.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to to 25mm. Standard Lengths (L) available from 4mm to 120mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.