105

Written by admin on April 13, 2017 in

Grooved Pin S30
Full length parallel grooves double chamfer
Part No. 105

Typical Applications

  • For applications for 059 pins where the use of semi automatic or automatic installation equipment is required due to high volume.
  • A double chamfer is provided to simplify bowl feeding.
  • Can be used in lower volume applications for double ended entry.

 

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 120mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.