Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S8
Third length centre tapering grooves DIN1475
Part No. 058

Typical Applications
  • Tapering groove design gives easy installation either way.
  • Central location allows the pin to be used as a cross handle, hinge pin or fulcrum bolt.
  • A plain portion at each end gives a free fit for mating components.
  • Length of grooved section can be increased or decreased to suit applications.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 1.5mm to 25mm. Standard Lengths (L) available from 8mm to 180mm*

*depending on pin Ø required, for example, Ø1.5mm can only have a length of 8-20mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.