Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S5
Full length parallel grooves DIN1470
Part No. 100

Typical Applications
  • Plain spigot on one end of pin allows the fastener to be easily located in the drilled hole before assembly
  • Maximum retention from parallel grooves
  • Plain spigot length can be increased for special applications
  • Application as for part no. 059

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 110mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.