Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S4
Half length reverse tapering grooves DIN1474
Part No. 057

Typical Applications
  • Reverse taper groove eases installation into blind drilled holes.
  • Half length plain portion can be used as a drive element stop pin or bearing.
  • Plain portion can also be used as a handle replacing an expensive threaded component.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 1.5mm to 25mm. Standard Lengths (L) available from 4mm to 180mm*

*depending on pin Ø required, for example, Ø1.5mm can only have a length of 4-20mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.