Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S30
Full length parallel grooves double chamfer
Part No. 105

Typical Applications
  • For applications for 059 pins where the use of semi automatic or automatic installation equipment is required due to high volume.
  • A double chamfer is provided to simplify bowl feeding.
  • Can be used in lower volume applications for double ended entry.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 120mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-10mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.