Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S24
Half length parallel grooves
Part No. 104

Typical Applications
  • A parallel groove over half the length of the pin significantly increases resistance to withdrawal in arduous applications (e.g. shock and vibration).
  • Plain spigot on grooved end allows location in hole before assembly.
  • Hole preparation recommendations should be followed closely.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to 25mm. Standard Lengths (L) available from 4mm to 160mm*

*depending on pin Ø required, for example, Ø0.8mm can only have a length of 4-12mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.