Insert Technology For Plastics, Composites And Metal Alloys
 
 
Tappex Products
If you know the part no. you require please enter it here		 GO
 
 

Order Sample Print

Grooved Pins
Standard Types

 

Grooved Pin S112
Third length double parallel grooves
Part No. 109

Typical Applications
  • The use of a parallel groove improves pin retention.
  • Should be used to replace 060 and 103 in applications where high vibration or shock loading may occur.
  • Plain spigot on each end allows location prior to assembly.
  • Pin can be installed from either direction in blind or through holes.
  • Use where shorter groove lengths are required.

(Note : Letters denote critical dimensions of Grooved Pins, please contact Tappex for details). Standard Diameters (d1) available from 0.8mm to to 25mm. Standard Lengths (L) available from 12mm to 120mm*

*depending on pin Ø required, for example, Ø2mm can only have a length of 12-30mm as standard. Specials will also be considered to suit your individual needs.
 

These Grooved Pins are produced in Germany by Kerb-Konus-Gesellschaft and
Tappex Thread Inserts Ltd. are their Sole Distributor in the U.K. and Eire.