Insert Technology For Plastics, Composites And Metal Alloys

Material: Brass - to BS EN 12164 CW 614N
REACH/RoHS compliant as per the candidate list of substances of very high concern dated 13/01/2010

Finish: Self-Colour. Special finishes to customer requirements, at extra cost.

Description: The Microbarb Multisert has larger head and barb diameter to provide increased bearing surfaces.

Application: Designed for use in thin section thermoplastic and some thermoset materials. Ideal for Vacuum formed, Rotational moulded and fabricated parts, where the insert is installed in one direction and the bolt assembled from the other end, giving maximum pull-out loading.

Hole Size: Moulded and drilled hole diameters vary dependent upon the nature of the final assembly, component geometry and plastic material. Please consult our technical department for a precise recommendation, to ensure optimum production conditions.Sizes given are for reference purposes only.

Hole Design: The hole design information is intended to indicate the approximate dimensional requirements for satisfactory installation of the insert. They should not be specified for production tooling without prior consultation with our Application Engineering Department - we accept no responsibility should the use of this information without consultation result in product failure. Please call our application engineers for assistance +44 (0) 1789 206600

Installation: This insert can be used for heat or push in installation depending on the plastic material.

MANY VARIATIONS ON ALL OUR STANDARD PARTS, INCLUDING MALE INSERTS, ARE AVAILABLE. IMPERIAL THREAD SIZES USE NEAREST METRIC EQUIVALENT FOR EXTERNAL DETAIL. PLEASE CONTACT US WITH YOUR REQUIREMENTS.