Insert Technology For Plastics, Composites And Metal Alloys

Material: Brass - to BS EN 12164 CW 614N
REACH/RoHS compliant as per the candidate list of substances of very high concern dated 13/01/2010

Finish: Self-Colour. Special finishes to customer requirements, at extra cost.

Description: The Multisert Unheaded is a barbed insert, and is available in two standard lengths - regular and short.

Application: Used in thermoplastic materials where mating component fits flush, or in controlled pull through applications providing correct stepped hole design is used, at lower unit cost than headed inserts. Also can be used in light load applications in timber.

Hole Size: Moulded and drilled hole diameters vary dependent upon the nature of the final assembly, component geometry and plastic material. Please consult our technical department for a precise recommendation, to ensure optimum production conditions.Sizes given are for reference purposes only.

Hole Design: The hole design information is intended to indicate the approximate dimensional requirements for satisfactory installation of the insert. They should not be specified for production tooling without prior consultation with our Application Engineering Department - we accept no responsibility should the use of this information without consultation result in product failure. Please call our application engineers for assistance +44 (0) 1789 206600

Installation: This insert can be press fitted cold, hot or with ultrasonics depending on the plastic material .

MANY VARIATIONS ON ALL OUR STANDARD PARTS, INCLUDING MALE INSERTS, ARE AVAILABLE. IMPERIAL THREAD SIZES USE NEAREST METRIC EQUIVALENT FOR EXTERNAL DETAIL. PLEASE CONTACT US WITH YOUR REQUIREMENTS.